MIS:MERMAID
MIS:MERMAID
Misfit Shapes
Mermaid Killer
Product rating:
4 out of
5 with
1 ratings
Write a Review
One of the signature models of Otis Carey the MERMAID KILLER has it all. A low nose rocker for paddle power but an entry feeder channel giving the board amazing lift. The tail has two feeder channels for control, speed and release. The reduced length and straighter outline allows for an elevated surfing experience and the ability to be positioned anywhere on the wave. Otis rides 5'2 by 17 3/4 by 2 5/16 with 26.2L.
Ride 8 to10 inches shorter, 1 inch narrower and the same thickness as a traditional shortboard.
Ride 8 to10 inches shorter, 1 inch narrower and the same thickness as a traditional shortboard.
2-6 ft
Wave Height
4 / 5
Paddle Power
5 / 5
Drive/Speed
4 / 5
Maneuverability
Rocker Info
Flat rocker with apex near front fins for increased tail lift. It has a low nose rocker for paddle power.
Rail Info
Medium 50/50 rails.
Concave Info
Slight concave running through board, with a feeder channel in the nose for lift and channel under the back foot for control and response. The entry concave helps with a planing paddle and with take offs. There is a slight concave through into the tail wh
From
$895.00
$895.00
Maximum speed and projection the Misfit Mermaid Killer is for progressive surfing and innovative airs with the ultra short and refined shape. The foam has been redistributed through a parallel outline and unique curves allowing for a reduction in its size compared to traditional shortboards. The reduced length and outline allow for responsiveness and positioning in the wave.
Related Products:
"You're reviewing Mermaid Killer
You Must be Logged in to Write a Review
-
Mermaid Killer
5' 8" x 18 3/4" x 2 5/8" x 34.4L
Review by BenAge: 18 | Height:191cm | Weight: 75kg | skill: Experienced(7/11/2019) -
Drive / Speed Movability Paddle Power Stability Quality Overall Real fun in most conditions.
Sign up for our newsletter
© Copyright 2010 - 2020 - Boardcave ~ The Surfers Store. Aspects of this portal are patented, patent-pending, or patent-applied-for. - Powered by Cavewire: 