Selecting the Right Tail Pad
The selection of surfboard tail pads
out on the market is crazy! And with more brands coming out daily, the options are endless. What's funny however, is when we treat ourselves to a new board, we revert to the “yeah that will do..” attitude. There's actually much more to it. Each tail pad has its own purpose, and the intricate design of them aims to benefit your surfing.
Unlike Surfboard Fins
, we don’t have the liberty to change our tail pads regularly. We’ve compiled some insights on what to look for when buying a new traction pad
What is a Surfboard Traction Pad?
One of the first things you observe when picking up a surfboard for the first time is that board’s surface is slippery. When it comes to surfing, water and a slippery surfboard aren’t exactly the best combination. To solve this, surfers use two methods for getting better traction: traction pads and wax application.
Surfboard traction pads or surfing grip pads are pieces of foam that are usually placed near the tail area of the board where the rear foot is placed. Surfers generally prefer traction pads over wax because it is a one time install and eliminates the need for constant waxing. These are also perfect for beginners since it gives them a reference point on where they can place their foot, helping them improve their stance in the process.
Mick carefully applying a tail pad to his DHD surfboard.
How to Choose a Surfboard Traction Pad
Selecting a traction pad boils down to two major factors: style and functionality. While style involves personal taste and there is no shortage of designs out there, function requires a little bit of thinking. The best way to shop is to first figure out what you want with your traction board in terms of functionality and then select the best design after.
One or multiple pieces
A single piece traction pad is easier to install but may not be a perfect fit for all surfboards. A two- or three-piece traction pad, on the other hand, allows for better customisation. Depending on how specialised your surfboard, you could use multiple traction pads of up to five if need be. While this makes it easy for you to tailor-fit your installation it also has its downsides. These are harder to install and are easier to peel because each piece has a lesser surface area to stick to.
Raised or no raised arch
A raised arch offers you better stability when your surfing style involves a lot of foot slamming on the traction pad. However, it limits your foot’s mobility as the arch may get in the way of smoother transitions as you move your foot around the tail.
High versus low kick
The kick functions like a stop that prevents you from kicking your rear foot off when making turns. Higher kicks are designed for more aggressive surfers. For everyday surfing or those who simply cruise over the waves, 20-degree kicks should do the job.
Using a front deck grip or not
Most surfers can do away with a front deck grip. These certainly look good on a board but if you’re not planning to do massive airs then you can skip this altogether. Front deck grip provides surfers the additional benefit of having their foot planted during big airs giving them better control over their surfboards.
Surfboard traction pad material
Another important thing to check when shopping for traction pads are the materials used for its construction. The type of rubber foam used determines how it reacts to water. Look for something that provides great traction while maintaining its integrity when wet. Today’s traction pads are more capable after undergoing several upgrades since its introduction in the 1970s. These are now made from Thermoformed EVA and available in a variety of shapes, arches, and colours.
Surfboard traction pad styles
Although this is considered as a matter of personal preference and does not have anything to do with a traction pad’s performance, selecting a traction pad that works with your taste makes it personally rewarding. With surfboard grip pads coming in different shapes, styles, and colours finding the perfect traction pad that complements your surfboard is easy.
When Should You Use a Surfboard Tail Pad?
Traction pads are designed for maximum grip and sure beats the trouble of waxing the surfboard every time you have to use it. Surfing traction pads enhance performance and makes surfing more enjoyable. It helps you stand up faster, makes it easier for you to plant your foot, and helps improve your stance.
Surfing traction pads work as an anchor when you're manoeuvring the waves or doing turns. These are also ideal for cruising or just standing up on the surfboard. Traction pads are often seen on shortboards. It is because shortboards have a small surface area so it important that you maintain optimum stance. A traction pad can act as a guide for proper foot placement.
There’s just no downside to using surfing grip pads. These are perfect for any surfing condition or any skill level. Anything that gives you better control over your surfboard or helps you maintain proper stance is always a plus for any surfer.
The Four Essential Components to Tail Pads
The degrees in the kick range from a mellow 20 degrees right up to vertical. The steeper the kick the more secure your foot is to blow out the back of waves. If its performance surfing you like, a kick between 45 degrees to vertical is the perfect all rounder. If it's a pad you need for a fish or retro board
, a mellow flat tail pad is your answer for down the line surfing.
Arch design alone is incredibly broad; it all comes down to the size of your foot and how much movement you like to have. If you’ve got smaller feet, the need for a pad with a small to minimal arch would be best. If you've got a big foot, then look for something with a longer, higher arch that nearly runs the length of the tail pad.
Number of Pieces
From one piece to five piece, they're designed to effectively be usable on most boards.
One piece pads aren't as common nowadays as they were 10+ years ago, however they have made a comeback recently for their durability.
For a while the two piece pads were seen as the weird uncle to the three pieces. Typically featuring no arch and a mellow kick, these pads are great if you’re throwing something down on the rear of your fish.
3 pieces are the most common grips, allowing for an even spread of grip and versatility for all board models.
Five pieces are effectively the three piece grip but with two tabs that sit above the main area of the tail pad adding extra grip in bigger swell.
The grooves themselves are more often than not shaped like diamonds, while some feature multi layered grooves and others a single layer groove.
Circular designed traction is also starting to make an appearance amongst some manufactures. However, the basic rule of thumb is the rougher the grooves, the greater the traction. This provides maximum resistance against slipping and extra grip, but will still allow you to move your foot when needed.
A single layer groove is generally a straightforward design that allows both grip and movement. A multi layered groove looks like a diamond with another diamond on top. These are the grippiest of the grippy. Once your foot is down, it isn't moving. And if it does, it’s against its own free will.
So What’s The Best Tail Pad For Me?
More often than not, it’s personal preference of what works best for you. However, consider the board you’re applying it to as the basis for your decision.
From there, you can ask yourself:
- How many pieces do I need?
- Does the kick have a high enough support or do I need something with less kick?
- Consider the arch and how your foot would relate to it
- What kind of waves are you looking to use your new board in?
- Do I need something with ultimate traction? or something that lets me shift around freely?
Once you've answered these questions, apply the pad and you're good to go. Just remember, you don’t want to be playing around with them too much or the pads will lose their sticky adhesive. The unfortunate thing is once its down, leave it.
Installing a Traction Pad on your Surfboard
How long and how well your traction pad sticks on your surfboard depends on how well it is installed. Below are the steps on how to professionally install your surfboard grip pad:
- Thoroughly clean the surfboard’s surface. Remove any wax, residues, or any impurities.
- Measure twice cut once. No cutting necessary but this tip still applies here. Carefully measure where you would like to position the trackpad and mark this.
- Remove the adhesive cover and gently stick it on the surfboard starting from one end going to the other. Applying pressure while doing this to remove any air bubbles.
- Let the traction pad sit for at least a day before using it. This can also be referred to as ‘curing time.’ This gives the traction pad’s adhesive enough time to properly settle with the board's surface.
Surfboard Traction Pads – Good or Bad Idea
Are traction pads a good idea? The short answer is Yes! Traction pads give you grip hence, better control over your surfboard. Anything that enhances your performance is definitely a plus in anyone’s book. It makes turns easier and saves you from the trouble of constantly waxing your surfboard every time you use them.
Now, to ensure you're riding the right board, check out our article, Are You Surfing The Wrong Board? Otherwise, browse our range of traction pads, below.
Popular Traction Pads
Shop All Traction Pads